SEA Series Cold Water Pressure Washer

Stationary Electric Cold Water Pressure Washer | SEA Series

Wall- or stand-mounted electric cold water pressure washer for permanent wash-down stations. The SEA Series runs off building power in a stainless or mild steel cabinet, with no engine, no burner, and no exhaust — so it can be installed inside a plant or wash bay and plumbed to reach outdoor work. Fifteen configurations span 1000 to 3000 PSI across single- and three-phase power.

Pricing available upon request. This product is manufactured to order. Freight is quoted with your order.

Applications

• Indoor wash-down stations and permanent cleaning bays
• Food processing and packaging facilities
• Manufacturing floors and equipment cleaning
• Fleet and shop maintenance
• Plumbed outdoor plug-and-wash points
• Any site where a fixed station beats a portable unit

Key Features

• Tri-plunger oil-bath pump with a 7-year warranty — belt-driven off the motor through dual V-cogged belts rather than direct-coupled, so it runs slower and cooler. The warranty length is the manufacturer telling you what they expect out of it.
• Accepts inlet water up to 145°F — if your building already has hot water, you can feed it in and get heated cleaning without buying, fueling, or servicing a burner.
• Fully electric, no combustion — no exhaust to vent, which is what makes permanent indoor installation practical where a gas or oil-fired unit would need engineering.
• Cast-iron pulleys adjustable with two bolts — belt tensioning is a five-minute job with hand tools instead of a service call.
• Thermal pump protector and inlet strainer — dumps water before heat builds in bypass, and keeps grit out of the pump on plant water lines.
• Stainless or mild steel cabinet — stainless for washdown and corrosive environments, mild steel where the ambient is dry and budget matters more.
• Compact 31 × 21 × 16 in. footprint — mounts on a wall bracket or floor stand and stays out of the working area entirely.

Why Choose the SEA Series

• A station, not a machine to move: mounted once, connected to power and water, and always ready — no staging, no cords across the floor, no fueling.
• Heat without a burner: feeding 145°F supply water covers a lot of what hot water units are bought for, with none of the burner maintenance.
• Built to be serviced in place: belt drive, adjustable pulleys, replaceable inlet filter — the wear items are the accessible ones.
• Configured to your building: 120V single phase through 460V three phase, so it specs to the power you have rather than requiring a new drop.
• Certified performance: CETA-certified to within 5% of listed flow and pressure ratings — a third-party check, not a factory claim.

Specifications

• Pressure and flow: 1000–3000 PSI, 2.8–4.2 GPM (15 configurations)
• Power: 120V, 208V, 230V, or 460V — single or three phase, 2.0–7.5 HP
• Cabinet: stainless steel or mild steel
• Inlet water: accepts supply temperatures up to 145°F
• Dimensions (L×W×H): 31 × 21 × 16 in.

See the spec sheet below for the full configuration table, including voltage, phase, amperage, and pump model by unit, plus available hose reels, floor stands, wall brackets, float tank, and LanCom wireless remote options.

Warranty and Certification

• 7-year limited warranty on the high-pressure pump
• ETL Listed
• ISO 9001 registered manufacturing
• CETA certified — performance within 5% of listed specifications

Spec Sheet